Member Login home | product | services | download | reseller | about | contacts | support
Induction for Working Safety & Health for CIVIL Worker Training 


Introduction
OCCUPATIONAL SAFETY AND HEALTH ACT 1994  stated that it shall be the duty of every employee while at work to take  reasonable care for the safety and health of himself and of other persons who  may be affected by his acts or omissions at work.

Inconsequence of this needs, Ministry of Human Resource, on 28th January 2000,  has ordered all civil worker, must attend induction course relating to safety  and health occupation before they are allowed to work in the construction area.

Objective
To provide awareness about the importance in having a safe & healthy work place.
To change the perception towards safety and health at work place.
To convey general knowledge relating to the safety and health at work place.
To confirm with the act regarding safety and health at work place
 


Content
Module 1: Introduction, rules, cleanliness, prevention, fire, utilities, electrical equipment at workplace, mobile electric generator, and case studies

Module 2: Transport vehicle at workplace, crane, hoist, excavation, demolition, steel frame erection, rooftop works.

Module 3: Self protection equipment, working with scaffolding, working on the road, working with water, and case studies

Module 4: Working in a contained area, soldering and cutting works, manual works, working with chemicals, dust and smoke, noise and vibration, heat, ways to handle accident and questions and answer session.

Instructor
EN A. KHALIL BIN KAMARUDIN

. Safety and Health Officer, Selia Selenggara Selatan Sdn Bhd
. Registered with Department of Safety & Health Occupation (JKKP IS 127/438/2/1480)
. Registered with Safety and Health Occupation Department as Trainer (JKKP IS/682/8-221 (2))
. Has worked with IJM Coproration, Ahmad Zaki Sdn Bhd, BSA Sdn Bhd, SKF Bearing Ind, Sdn. Bhd. and ALPS Electric.


Who Should Attend?
All employee who has never attend induction course for safety & health either by CIDB or NIOSH.

Training Specification
Module being used are certified by NIOSH
Language used will be one suitable with the trainee.
Training duration must not less than 6 hours (equivalent to ONE day course)
Training will be held in training room complete with training utilities
Number of trainee cannot exceed 40 people. Minimum is 35 people.
Trainee will be given the NIOSH kupon at the end of the course.

Training Details
Date: Every Saturday & Sunday
Time: 8:30am to 4pm
Place: to be announced

Contact Person
A.Khalil Bin Kamaruddin - 013.616.4847
Ahmad Hafiz Wahy - 012.369.7260

NioshTraining
brochures
details
details (Malay)


Copyright 2004, 2005, 2006 reserved for Lui Mewah